FEATURES AND BENEFITS

• TRIANGLE SHAPE -Enables each section to "Lock In automatically." No more twisting and turning to lock sections.

• HIGH VISIBILITY - Fluorescent tip section is highly visible and has a foam core. All tip sections are 1.15" diameter. All sections are 100% tested per OSHA.

• EXTRA REACH - New 40' mode! now available.

• RE-DESIGNED LOCK BUTTONS - New shape and larger size are easier to operate with and without gloves.

• MORE VERSATILE - Use only the number of required sections to perform each job, Example. A 40 ft (12.2 Meters) too! can be reduced to a 20 ft. (6.1 Meters) working height by depressing the lock button and sliding the bottom sections off. This allows for a lightweight tool to perform the work easier.

• EASY DISASSEMBLY - Simply depress the lock button and slide section, or sections, out. No tools are required for disassembly.

• ERGONOMIC DESIGN - Gives the operator a "better gripping" surface for better control

• REDUCES INVENTORY- Only one size lock button and spring for replacement needs.

• EASY MAINTENANCE - All sections have a smooth glossy surface for routine cleaning and waxing.

• NEW BASE CAP - Cushions and protects base end.

• IMPROVED UNIVERSAL HEAD - Strong aluminum alloy head incorporates corona discharge design and "includes a captive Belleville washer" to hold universal attachments securely.  

D'Ewart Representatives L.L.C. represents Hastings in Alaska, Idaho, Montana, Oregon, Utah and Washington. If you are interested in Hastings products and would like more information, call us at 425-485-6545 or use our information request form.

Visit Hastings Fiber Glass Products on-line at www.hfgp.com

The Temporary Dead End Arm enables a line crew to spread conductors off an existing dead end arm to gain working clearance for reconductoring and terminating the new conductors.

• Arms are constructed with 3'' Dia. Fiber Glass and a foam core to meet most load requirements for temporary dead ends. The Fiber Glass Arm is electrically tested to OSHA and ASTM F-711 standards.

• Load Rating - 500 Lbs. (227Kg.) per position or 1,000 Lbs. (554 Kg.) Total working load limit.

• Arms have two bushed holes with 18" spacing to accommodate 5/8" Dia. hardware bolts for dead ends. Two aluminum sleeves are installed to prevent wear on the fiber glass arm.

• Steel mounting brackets have multiple holes for adjustment to the various arm sizes. NOTE: adjustment range is described for all catalog numbers shown under ordering information.

• Arms can be installed on either the top or bottom of existing cross arms.

• Two styles are available. Butt swivel eye for dead ending a single phase tap line or a 3 way aluminium alloy equipment mounting brakes for mounting a cutout, lighting arrester and dead ending a tap line.